top of page
All Posts
2010 Chevrolet Silverado 1500 Hybrid – Driver Temperature Changes to Full Hot
CUSTOMER CONCERN Driver-side climate-control temperature intermittently changes to full hot. CAUSE DTC B0413 was stored, and testing confirmed a failed driver-side blend-air-door actuator. CORRECTION Remove and replace the failed driver-side blend-air-door actuator.
2010 Ford Escape Hybrid – No Throttle Response
CUSTOMER CONCERN Accelerator pedal input produces no throttle response. CAUSE DTC P2112 was stored, and the confirmed failure was the electronic throttle-body assembly. CORRECTION Remove and replace the failed electronic throttle-body assembly.
2010 Ford Fusion Hybrid – Hard Brake Pedal and Brake Warning
CUSTOMER CONCERN Brake warning is displayed and the brake pedal is hard to apply. CAUSE DTC C101C was present, and testing confirmed the brake-booster vacuum pump had failed. CORRECTION Remove and replace the failed brake-booster vacuum pump.
2010 Ford Escape Limited Hybrid – ABS and Brake Warning Lights On
CUSTOMER CONCERN ABS and red brake warning lights remain illuminated. CAUSE DTC B1342 reset immediately after clearing, confirming an internal failure of the ABS control module. CORRECTION Remove and replace the failed ABS control module.
2010 Ford Escape Hybrid – Ignition Key Difficult to Turn and No Start
CUSTOMER CONCERN Ignition key is difficult to turn and the vehicle intermittently will not start. CAUSE Inspection confirmed the steering-column lock module was binding. CORRECTION Remove and replace the binding steering-column lock module.
2010 Ford Escape Hybrid – ABS Light With C1015-64
CUSTOMER CONCERN ABS warning light is on with DTC C1015-64. CAUSE Vacuum-system testing confirmed a failed brake-booster vacuum check valve. CORRECTION Remove and replace the failed brake-booster vacuum check valve. Verify brake-booster vacuum operation.
2010 Ford Escape Hybrid – Check Engine Light With P0130
CUSTOMER CONCERN Check-engine light is on with DTC P0130. CAUSE Testing confirmed a failed bank 1 sensor 1 universal heated oxygen sensor. CORRECTION Remove and replace the failed bank 1 sensor 1 universal heated oxygen sensor.
2010 Chevrolet Tahoe Hybrid – Intermittent Stall and No Start With U0073
CUSTOMER CONCERN Engine stalls intermittently and may not restart with DTC U0073 stored. CAUSE Network testing confirmed an internal Engine Control Module failure. CORRECTION Remove and replace the failed Engine Control Module. Program and configure the replacement module.
2010 Chevrolet Tahoe Hybrid – Rearview Camera Inoperative After Collision
CUSTOMER CONCERN Rearview camera is inoperative after collision repairs. CAUSE Inspection confirmed collision damage in the rearview-camera wiring harness. CORRECTION Repair the damaged rearview-camera wiring circuit.
2010 Chevrolet Silverado 1500 Hybrid – Stability Code C0710 Resets Immediately
CUSTOMER CONCERN Service Stability warning is on and DTC C0710 resets immediately after clearing. CAUSE Testing confirmed a failed steering-wheel position sensor. CORRECTION Remove and replace the failed steering-wheel position sensor. Center and calibrate the replacement sensor.
bottom of page