Having this problem?

Voltage Auto Service specializes in advanced hybrid, plug-in hybrid and EV diagnostics. Schedule an appointment to have the fault properly tested before replacing parts.

2012 Chevrolet Volt – No Start or Electric Propulsion With P0A0C

Aug 16
1 min read

CUSTOMER CONCERN

The vehicle will not start or move under electric power after transmission work and stores DTCs P0A0C and P1E00.

CAUSE

The power-inverter-module cable cover did not complete the high-voltage interlock circuit because it was missing, damaged, or incorrectly seated.

CORRECTION

Remove and replace the power-inverter-module cable cover, seat the high-voltage interlock connector correctly, clear P0A0C and P1E00, and verify Ready mode and propulsion.

Recent Posts

See All

2019 Volvo XC60 T8 Inscription – Parking Brake Will Not Apply or Release

CUSTOMER CONCERN The electric parking brake is stuck on or will not apply, with a parking-brake motor circuit fault. CAUSE The confirmed repair found the parking-brake motor connector terminals revers

2020 Lincoln Aviator – Suspension Faults C1124:54 and B1041:52 After Collision Repair

CUSTOMER CONCERN After right-front collision repairs and replacement of the right-front air spring, height sensor, and compressor, DTCs C1124:54 and B1041:52 return because the height-sensor calibrati

2018 Toyota Prius Prime Plus – TPMS Fault C2126 After Sensor Replacement

CUSTOMER CONCERN The tire-pressure warning system stores DTC C2126 because a transmitter ID is not received in main mode after sensor replacement. CAUSE The confirmed repair identified a failed replac

2012 Chevrolet Volt – No Start or Electric Propulsion With P0A0C

CUSTOMER CONCERN

CAUSE

CORRECTION

Recent Posts

CALL US

EMAIL US

OPENING HOURS