CUSTOMER CONCERN Customer states the engine barely moves when attempting to start and cannot be turned manually. DTCs P3190, P0A0F, P0A80, P3000 and P3147 are stored. CAUSE Separating the engine from the transaxle confirmed the hybrid automatic transaxle was mechanically locked. CORRECTION Remove and replace hybrid automatic transaxle. Clear powertrain and hybrid-system DTCs and verify normal engine cranking and vehicle operation.

CUSTOMER CONCERN Customer states the air conditioning does not operate. DTC B1476 is stored. CAUSE High-voltage compressor testing confirmed an internal short in the electric air-conditioning compressor. CORRECTION Remove and replace electric air-conditioning compressor. Evacuate and recharge the refrigerant system, clear DTC B1476 and verify cooling operation.

CUSTOMER CONCERN Customer states the replacement brake actuator pump will not run or build pressure. DTCs C1246, C1364 and C1365 are stored, and accumulator pressure reads zero. CAUSE The hydraulic system had no accumulator pressure after actuator installation, preventing normal pump control until pressure was established and the service routine completed. CORRECTION Power brake-pump motor to establish accumulator pressure, perform complete ABS bleed and linear-valve relearn,