CUSTOMER CONCERN After collision damage and grille-shutter replacement, the system reports that initialization is incomplete; the original fault was P059F73 for a shutter stuck closed. CAUSE The replacement active grille shutter had not completed its required initialization. CORRECTION Place the grille-shutter system in normal run mode, cycle the ignition to complete active grille shutter initialization, clear the stored fault, and verify normal shutter operation.

CUSTOMER CONCERN After collision repairs, the dash displays a message to clean the parking sensors even though the sensors are clean. CAUSE The repaired rear parking-aid sensors were out of calibration after the bumper work. CORRECTION Calibrate the parking-aid sensors and verify the false clean-sensor message no longer appears and parking-assist operation is normal.

CUSTOMER CONCERN The vehicle will not move or charge, and the instrument-panel charge indicator remains solid yellow after minor front-end body repair. CAUSE A secured high-voltage crash-related DTC lockout remained active after the collision repairs, preventing propulsion and charging. CORRECTION Perform the required post-collision and high-voltage system inspections, clear the secured high-voltage DTCs with a compatible scan tool, and verify normal charging and propulsion o

CUSTOMER CONCERN The active grille shutter remained inoperative after collision repairs and did not respond to commanded operation. CAUSE The collision had physically damaged the active grille-shutter actuator. DTC P05B131 was present. CORRECTION The damaged active grille-shutter actuator was replaced.