CUSTOMER CONCERN The engine will not crank after engine replacement and DTCs P1B06, P1B05, and P1AE2 are stored. CAUSE Inspection confirmed the high-voltage battery disconnect lever was broken during the disconnect procedure, leaving the interlock circuit open. CORRECTION Remove and replace the high-voltage battery disconnect lever, fully seat the interlock components, clear the DTCs, and verify the engine cranks.

CUSTOMER CONCERN Vehicle will not crank and stores DTCs P1AE2, P1B05 and P1B06. CAUSE The high-voltage interlock remained open because the manual-disconnect lever and sight shield were not fully seated. CORRECTION Correctly seat the high-voltage manual-disconnect lever and install the sight shield to close the interlock circuit.