CUSTOMER CONCERN After rear caliper and hose replacement, the brake system stores DTCs C1203, C1345, and C1451. CAUSE The brake hydraulic system was not fully bled, preventing the linear-solenoid valve offset calibration from completing. CORRECTION Perform the complete scan-tool brake bleeding procedure, clear DTCs C1203, C1345, and C1451, perform the linear-solenoid valve offset calibration on level ground with skid-control voltage near 13 volts, and verify normal brake oper

CUSTOMER CONCERN After rear brake-caliper replacement, DTCs C1203, C1345, and C1451 are stored. CAUSE The brake hydraulic system had not been completely bled and the linear-valve offset had not been learned after brake service; C1451 indicates the brake pump is disabled until bleeding is completed. CORRECTION Perform the complete scan-tool brake-bleeding procedure, clear DTCs C1203, C1345, and C1451, perform the linear-valve offset calibration on level ground, and verify norm

CUSTOMER CONCERN After left-rear caliper and brake-hose replacement, C1203, C1345, and C1451 remain stored. CAUSE Air remained in the hydraulic brake system, preventing the linear-solenoid valve offset calibration from completing. CORRECTION Perform the scan-tool brake bleeding procedure until all air is removed, then perform the linear-solenoid valve offset calibration, clear DTCs, and verify brake operation.