CUSTOMER CONCERN Vehicle will not crank after engine service, and DTCs P1AE2, P1B05 and P1B06 are stored. CAUSE Inspection confirmed the drive-motor-generator control-module sight shield was not installed, leaving the high-voltage interlock circuit open. CORRECTION Install and secure the drive-motor-generator control-module sight shield to close the high-voltage interlock circuit.

CUSTOMER CONCERN Oil-pressure warning remains on while the engine is running. CAUSE DTC P0521 was stored, and testing confirmed a failed oil-pressure sending switch. CORRECTION Remove and replace the failed oil-pressure sending switch.

CUSTOMER CONCERN Lower right brake and turn-signal lamp is inoperative while the upper lamp operates normally. CAUSE Power, ground, and bulb checks confirmed a failed lower lamp bulb socket. CORRECTION Remove and replace the failed brake and turn-signal bulb socket.

CUSTOMER CONCERN Engine misfires on cylinder 6 and compression testing shows no compression on that cylinder. CAUSE Inspection confirmed a failed valve roller lifter on cylinder 6. CORRECTION Remove and replace the failed valve roller lifter.